HY-SW1071-GS / What are the specifics Hybrone Smart Combustible Gas Sensor ?

Modified on Mon, 3 Jun at 4:19 PM

About the Hybrone Smart Combustible Gas Sensor

HY-SW1071-GS

Box Content

Device Description

Valve Manipulator Descprition

Specifics

1. High stability gas sensor

2. Possibility to test with the app

3. Voice command

4. Real-time alarm on smartphones report

5. Valve control with application

6. Plug & Play

7. Once the gas is detected manipulator automatically opens the gas valve closes.

Please read the user manual before using the device.

Figures in the manual are for reference only.

Operating Voltage	AC 100V~240V
Average Power Consumption	<3W
Warm-up Time	Approximately 3 minutes
Detected Gas	Natural Gas (CH4)
Alarm Sensitivity	6%LEL (±3%LEL)
Alarm	Red LED Flasher & Voice Command
Error	Yellow LED Flasher & Voice Command
Sound Level	≥70dB/1m
Alarm Mode	Acoustic & Optical Alarm
Auxiliary	Output Valve Manipulator Output
Valve Manipulator Output	11~13V@500mA
Network	WiFi 2.4GHz
Operating Temperature	-100 ~ +550 (Indoor use only)
Storage Temperature	-200 ~ +600
Operating Humidity	≤95%RH (Non-condensing)
Installation	Wall Mount, Plug & Play
Dimension	89.5 x 89.5 x 38 mm (LxWxH

Tips

1. The surface of the product has no obvious that is expected to have a temperature situation.

2. Please detector during the renovation of your home remove it.

3. Avoid spraying aerosol spray around the sensor

4. Ensure that the semiconductor on the gas detector 5 has a service life of one year, please be timely replace it.

5. Any damage to the gas sensor test the detector with a lighter do not.

6. Oil on the gas convection window adhesion after prolonged use may affect gas detector sensitivity. Users are advised to open the gas convection window a small amount of detergent every three months and It is recommended to clean it using a brush.

Do not allow detergent to enter the body of the detector please do not allow it. After cleaning, please test again.

7. Apply the detergent to the detector body do not allow it to enter. After cleaning please test again.

8. This device is used to detect natural gas used to extinguish the fire cannot be used.

9. This device for detecting natural gas used, CO and other harmful gases cannot be used for detection.

10. For your safety, make sure that the detector In addition to its use, please be cautious and safety measures in daily life increase your awareness.

What is Hybrone Smart Combustible Gas Sensor ?